京东路由器赵云BE6500刷机救砖TTL教程openwrt/RE-CS-06+拆机图文教程

教程需要拆机操作，可以用来救砖也可以用来刷机。支持所有固件版本。

项目	参数 / 说明
型号	京东云无线宝 BE6500（俗称 “赵云”）
发布时间	2024 年
定位	家用旗舰 / 性价比 WiFi 7 路由
WiFi 标准	WiFi 7（IEEE 802.11be），兼容 a/b/g/n/ac/ax
无线速率（双频）	2.4G：2×2 688Mbps5G：4×4 160MHz 5765Mbps合计：约 6453Mbps
无线速率（三频）	2.4G：2×2 688Mbps5.2G：2×2 160MHz 2882Mbps5.8G：2×2 1441Mbps
核心芯片	高通 IPQ5322 四核 1.5GHz（带 NPU）
内存 / 存储	1GB DDR4 / 128GB eMMC（可做私有云、离线下载）
天线	6 根外置高增益全向天线，4 路独立功放
网口	1×2.5G WAN + 3×2.5G LAN（全 2.5G）
扩展接口	USB 3.0（可外接硬盘）、Mesh JOY 键
关键技术	MLO 多频聚合、4K QAM、增强 OFDMA、Mesh 2.0
带机量	稳定支持 600～800 台设备

#uboot模式原厂分区表
IPQ5332# mmc part

Partition Map for MMC device 0  --   Partition Type: EFI

Part    Start LBA       End LBA         Name
        Attributes
        Type GUID
        Partition GUID
  1     0x00000022      0x00000821      "0:SBL1"
        attrs:  0x0000000000000000
        type:   dea0ba2c-cbdd-4805-b4f9-f428251c3e98
        guid:   d52dbaec-dfc8-42fb-64dd-445f3b099754
  2     0x00000822      0x00001021      "0:SBL1_1"
        attrs:  0x0000000000000000
        type:   7a3df1a3-a31a-454d-bd78-df259ed486be
        guid:   6b4414a8-8629-08f7-82e7-09c1e7f72932
  3     0x00001022      0x00001221      "0:BOOTCONFIG"
        attrs:  0x0000000000000000
        type:   2b7d04ff-31f0-4e6a-be9a-da50314dad58
        guid:   be258bb3-f9de-89c1-fc30-cbb5528cc70d
  4     0x00001222      0x00001421      "0:BOOTCONFIG1"
        attrs:  0x0000000000000000
        type:   7bd25378-5c39-11e5-8a77-40a8f05f1418
        guid:   74314ee9-87bb-a623-cb00-f9e1302b9d3a
  5     0x00001422      0x00002221      "0:QSEE"
        attrs:  0x0000000000000000
        type:   a053aa7f-40b8-4b1c-ba08-2f68ac71a4f4
        guid:   339438da-043d-53f4-8a39-2ca16c5d5541
  6     0x00002222      0x00003021      "0:QSEE_1"
        attrs:  0x0000000000000000
        type:   a6dd74a1-c8bf-4dbc-ae39-62b8e78c4038
        guid:   0c048ccd-ede7-e33f-850f-1611037f7af9
  7     0x00003022      0x00003221      "0:DEVCFG"
        attrs:  0x0000000000000000
        type:   f65d4b16-343d-4e25-aafc-be99b6556a6d
        guid:   a03834e6-885c-f699-b633-2aaa1ad5c8f3
  8     0x00003222      0x00003421      "0:DEVCFG_1"
        attrs:  0x0000000000000000
        type:   48bfa451-9443-46f7-b400-892a6b1bfc16
        guid:   ff8afa9d-709f-5393-529a-56a1f7c45e50
  9     0x00003422      0x00003821      "0:TME"
        attrs:  0x0000000000000000
        type:   0833175e-af8f-bacc-f2a2-5b70354b1a0a
        guid:   d3b40e1f-ea97-c181-30de-14e84fbc9c8c
 10     0x00003822      0x00003c21      "0:TME_1"
        attrs:  0x0000000000000000
        type:   66a49874-13d3-66ea-b0b7-3f61c7e405cd
        guid:   805d80f0-b281-df25-92db-af66cfee818e
 11     0x00003c22      0x00003e21      "0:CDT"
        attrs:  0x0000000000000000
        type:   a19f205f-ccd8-4b6d-8f1e-2d9bc24cffb1
        guid:   50ac1dec-83f6-8544-dd46-6aa3abb8a12c
 12     0x00003e22      0x00004021      "0:CDT_1"
        attrs:  0x0000000000000000
        type:   7a795379-c250-4282-a2c7-fc4e13f4a43d
        guid:   ec0ece19-5cfc-af10-0767-18f290850932
 13     0x00004022      0x00004221      "0:APPSBLENV"
        attrs:  0x0000000000000000
        type:   300ffdcd-22e0-47e7-9a23-f16ed9382387
        guid:   6829f780-77f6-7f2a-8be1-cde7e76a31ab
 14     0x00004222      0x00004821      "0:APPSBL"
        attrs:  0x0000000000000000
        type:   400ffdcd-22e0-47e7-9a23-f16ed9382388
        guid:   82c347d6-cb45-e6fe-7a9f-689ed38c5940
 15     0x00004822      0x00004e21      "0:APPSBL_1"
        attrs:  0x0000000000000000
        type:   c126787d-3eef-444c-9e43-feff3f103e22
        guid:   f09fc063-0ba5-b895-32dc-6abaf2be36f0
 16     0x00004e22      0x00005221      "0:ETHPHYFW"
        attrs:  0x0000000000000000
        type:   c1dc4cab-430b-4cdc-a8c5-7115912b74fe
        guid:   fe8a5d81-c943-e030-6d86-002e2916e73f
 17     0x00005222      0x00005a21      "0:ART"
        attrs:  0x0000000000000000
        type:   a72e50c1-d37c-429d-9620-35fca612b9a8
        guid:   f7d1a6a8-d365-793d-9238-81be80d8023e
 18     0x00005a22      0x00005c21      "0:LICENSE"
        attrs:  0x0000000000000000
        type:   a7a81a61-66ce-c908-f4a2-82d39d2aff57
        guid:   e128384c-02fb-0d93-76cd-629f02075a85
 19     0x00005c22      0x0000bc21      "0:WIFIFW"
        attrs:  0x0000000000000000
        type:   888d8069-8d27-40a8-95a9-6006e1ce9b3b
        guid:   1a1d50c1-c259-fa39-6790-46423b2fd8e7
 20     0x0000bc22      0x00011c21      "0:WIFIFW_1"
        attrs:  0x0000000000000000
        type:   981476f5-5cd7-42db-9ce9-87b3a31aadbd
        guid:   ca38814f-0460-2f98-18de-e0639d08846c
 21     0x00011c22      0x00015421      "0:HLOS"
        attrs:  0x0000000000000000
        type:   b51f2982-3ebe-46de-8721-ee641e1f9997
        guid:   c3a268fd-eae9-e835-aaa4-f31e3ab17b01
 22     0x00015422      0x00018c21      "0:HLOS_1"
        attrs:  0x0000000000000000
        type:   a71da577-7f81-4626-b4a2-e377f9174525
        guid:   7b8148fb-60e5-cb2b-3cb1-020e7d347d90
 23     0x00018c22      0x00055c21      "rootfs"
        attrs:  0x0000000000000000
        type:   98d2248d-7140-449f-a954-39d67bd6c3b4
        guid:   0f324228-4b42-bdf2-ba81-e7036f7f77ea
 24     0x00055c22      0x00092c21      "rootfs_1"
        attrs:  0x0000000000000000
        type:   5647b280-dc2a-485d-9913-cf53ac40fa32
        guid:   c2244eb8-9d5a-5cff-9715-9ae83dc809f9
 25     0x00092c22      0x00092e21      "factory"
        attrs:  0x0000000000000000
        type:   a72e50c1-d37c-429d-9620-35fca612b9a8
        guid:   2dfc3de5-5f10-bbf8-d72a-405261091789
 26     0x00092e22      0x00292e21      "plugin"
        attrs:  0x0000000000000000
        type:   5647b280-dc2a-485d-9913-cf53ac40fb42
        guid:   8e089ac3-8f3b-49af-aff5-ffce4efadd9d
 27     0x00292e22      0x002d2e21      "log"
        attrs:  0x0000000000000000
        type:   5647b280-dc2a-485d-9913-cf53ac40fb43
        guid:   3c6538be-d417-a2d4-ddc5-c2cce4b516b8
 28     0x002d2e22      0x004d2e21      "swap"
        attrs:  0x0000000000000000
        type:   5647b280-dc2a-485d-9913-cf53ac40fc41
        guid:   dd2fcbc9-7860-b21d-bda5-b91e77374b84
 29     0x004d2e22      0x0e677fde      "storage"
        attrs:  0x0000000000000000
        type:   5647b280-dc2a-485d-9913-cf53ac40fc42
        guid:   4a8b042a-58e9-56fc-ce73-984546af96ab
IPQ5332#

拆机图文教程

撕开背后脚垫，拆下4颗螺丝，翘片缝隙轻轻撬开

第一步、连接TTL模式

1、编程器使用3.3伏连接。使用的是杜邦线排针或针夹。不需要焊接。接口上的TX插路由的RX。RX插TX。GND插GND。VCC一定不要插。只要不插VCC三根线插错也没关系。放心大胆跟着搞。需要拆机教程可看简介或者评论区链接。如图所示代表连接成功了。恭喜本教程最难的一步完成。接下来可以傻瓜式操作了。

第二步、刷入uboot

TTL编程器USB和网线lan口连接电脑。路由器断电状态。点击打开设备管理器。查看电脑的USB的COM口。例如演示的这台电脑显示是3。打开mobaxterm，新建serial终端，选择com口3。speed选择115200。点击ok就进入TTL终端了。给路由器通电源。正常情况就会开始跑动数据。如果没有反应。常见原因：电脑USB接触不良。杀毒软件防火墙拦截。TTL接触不良或者错误。硬件损坏等。

第三步、刷入openwrt

拔掉路由器电源10秒。按住reset不松手。重新插电源，全程别松reset键！10秒后再松手。指示灯闪动后常亮状态。浏览器输入192.168.1.1就可以进入uboot界面了。选择openwrt固件。点击update。路由器会自动重启。灯光闪动，过程大概2分钟。等绿灯后。IP改为自动获取。新建网页打开192.168.1.1输入账号root登录。密码为password。恭喜openwrt救砖成功。如果以后想换固件。系统更新或重复第三步即可。

9008模式

TTL编程器确定正确连接。路由器通电。路由器灯光不亮或者无法进入uboot终端。无硬件问题。说明路由器进入9008状态。不要慌，跟着做。TTL编程器USB、网线lan口、路由器usb连接电脑。路由器断电状态。给路由器通电，设备管理器会发现未知硬件。工具包安装好驱动程序。运行一键救砖.bat。输入com口。例如本机com口5,输入5回车。自动运行提示上传成功后再次回车。路由器就可以进入uboot终端了。返回到第二步开始，复制刷入uboot命令，就可以救砖成功了。

#qwrt启动日志
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014]
[    0.000000] Linux version 5.4.213 (lean@lean-esx) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r47815-ddcc976f7b)) #0 SMP PREEMPT Tue Sep 2 10:29:18 2025
[    0.000000] Machine model: JDCloud BE6500
[    0.000000] Reserved memory: created DMA memory pool at 0x000000007f700000, size 9 MiB
[    0.000000] OF: reserved mem: initialized node dma_pool1@1, compatible id shared-dma-pool
[    0.000000] On node 0 totalpages: 229632
[    0.000000]   DMA32 zone: 3588 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 229632 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 24 pages/cpu s59416 r8192 d30696 u98304
[    0.000000] pcpu-alloc: s59416 r8192 d30696 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 226044
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=173ccb86-516a-e271-1e84-a772aaa016f4 gpt rootwait cnss2.bdf_pci1=0x2 swiotlb=1 coherent_pool=2M
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 887560K/918528K available (8190K kernel code, 498K rwdata, 2484K rodata, 640K init, 418K bss, 30968K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv2m: range[mem 0x0b00c000-0x0b00cffc], SPI[640:671]
[    0.000000] GICv2m: range[mem 0x0b00d000-0x0b00dffc], SPI[672:703]
[    0.000000] GICv2m: range[mem 0x0b00e000-0x0b00effc], SPI[704:735]
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000310] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000323] pid_max: default: 32768 minimum: 301
[    0.000430] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.000444] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.001617] ASID allocator initialised with 65536 entries
[    0.001699] rcu: Hierarchical SRCU implementation.
[    0.002282] mem dump base table DT node does not exist
[    0.002462] smp: Bringing up secondary CPUs ...
[    0.003562] Detected VIPT I-cache on CPU1
[    0.003622] CPU1: Booted secondary processor 0x0000000001 [0x51af8014]
[    0.004867] Detected VIPT I-cache on CPU2
[    0.004924] CPU2: Booted secondary processor 0x0000000002 [0x51af8014]
[    0.006150] Detected VIPT I-cache on CPU3
[    0.006205] CPU3: Booted secondary processor 0x0000000003 [0x51af8014]
[    0.006318] smp: Brought up 1 node, 4 CPUs
[    0.006342] SMP: Total of 4 processors activated.
[    0.006350] CPU features: detected: 32-bit EL0 Support
[    0.006357] CPU features: detected: CRC32 instructions
[    0.006401] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.006409] CPU: All CPU(s) started at EL1
[    0.006650] alternatives: patching kernel code
[    0.015468] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.015489] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.015620] pinctrl core: initialized pinctrl subsystem
[    0.016618] NET: Registered protocol family 16
[    0.017253] DMA: preallocated 2048 KiB pool for atomic allocations
[    0.017668] cpuidle: using governor ladder
[    0.017691] cpuidle: using governor menu
[    0.017833] NET: Registered protocol family 42
[    0.018023] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.022499] gpiochip_find_base: found new base at 459
[    0.022521] gpio gpiochip0: (1000000.pinctrl): created GPIO range 0->52 ==> 1000000.pinctrl PIN 0->52
[    0.022639] gpio gpiochip0: (1000000.pinctrl): added GPIO chardev (254:0)
[    0.022696] gpiochip_setup_dev: registered GPIOs 459 to 511 on device: gpiochip0 (1000000.pinctrl)
[    0.033452] gcc-ipq5332 1800000.gcc: Registered GCC clocks
[    0.039655] qcom,nsscc-ipq5332 39b00000.nsscc: Registered NSS CC clocks
[    0.054623] msm_sps_probe: sps:sps is ready
[    0.065520] cryptd: max_cpu_qlen set to 1000
[    0.152318] SCSI subsystem initialized
[    0.152489] usbcore: registered new interface driver usbfs
[    0.152530] usbcore: registered new interface driver hub
[    0.152564] usbcore: registered new device driver usb
[    0.152595] pps_core: LinuxPPS API ver. 1 registered
[    0.152601] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.152618] PTP clock support registered
[    0.153801] Advanced Linux Sound Architecture Driver Initialized.
[    0.153859] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.154655] clocksource: Switched to clocksource arch_sys_counter
[    0.155258] thermal_sys: Registered thermal governor 'step_wise'
[    0.155262] thermal_sys: Registered thermal governor 'user_space'
[    0.156197] NET: Registered protocol family 2
[    0.156350] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.157115] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.157146] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.157231] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.157376] TCP: Hash tables configured (established 8192 bind 8192)
[    0.157468] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.157505] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.157656] NET: Registered protocol family 1
[    0.157687] PCI: CLS 0 bytes, default 64
[    0.159610] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[    0.163796] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.163806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.187981] bam-dma-engine 7884000.dma: qcom,controlled-remotely unspecified
[    0.188676] bam-dma-engine 7984000.dma: qcom,controlled-remotely unspecified
[    0.189802] CPU: IPQ5322, SoC Version: 1.1
[    0.189809] OEM_ID: 0, PROD_ID: 0
[    0.192404] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[    0.193775] License Manager driver registered
[    0.194211] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.194246] msm_serial 78af000.serial: uartclk = 1843199
[    0.194302] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 34, base_baud = 115199) is a MSM
[    0.194327] msm_serial: console setup on port #0
[    0.809965] printk: console [ttyMSM0] enabled
[    0.814845] msm_serial: driver initialized
[    0.819190] random: crng init done
[    0.829183] brd: module loaded
[    0.832222] loop: module loaded
[    0.834025] mdio_bus fixed-0: GPIO lookup for consumer reset
[    0.834034] mdio_bus fixed-0: using lookup tables for GPIO lookup
[    0.834041] mdio_bus fixed-0: No GPIO consumer reset found
[    0.894662] qca-mdio 90000.mdio: CMN clock reset done
[    1.114888] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[0]' - status (0)
[    1.114896] qca-mdio 90000.mdio: Reset PHY by GPIO 510
[    1.335148] qca-mdio 90000.mdio: programe EPHY reg 0xc90f018 with 0x320c41
[    1.335442] qca-mdio 90000.mdio: programe UNIPHY reg 0xc90f014 with 0x1cc5
[    1.486086] mdio_bus 90000.mdio: GPIO lookup for consumer reset
[    1.486093] mdio_bus 90000.mdio: using device tree for GPIO lookup
[    1.486109] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@90000[0]'
[    1.486123] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@90000[0]'
[    1.486132] mdio_bus 90000.mdio: using lookup tables for GPIO lookup
[    1.486139] mdio_bus 90000.mdio: No GPIO consumer reset found
[    1.486396] mdio_bus 90000.mdio:01: GPIO lookup for consumer reset
[    1.486402] mdio_bus 90000.mdio:01: using device tree for GPIO lookup
[    1.486418] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@90000/ethernet-phy@0[0]'
[    1.486432] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@90000/ethernet-phy@0[0]'
[    1.486439] mdio_bus 90000.mdio:01: using lookup tables for GPIO lookup
[    1.486446] mdio_bus 90000.mdio:01: No GPIO consumer reset found
[    1.486696] mdio_bus 90000.mdio:02: GPIO lookup for consumer reset
[    1.486702] mdio_bus 90000.mdio:02: using device tree for GPIO lookup
[    1.486718] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@90000/ethernet-phy@1[0]'
[    1.486731] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@90000/ethernet-phy@1[0]'
[    1.486739] mdio_bus 90000.mdio:02: using lookup tables for GPIO lookup
[    1.486745] mdio_bus 90000.mdio:02: No GPIO consumer reset found
[    1.486967] mdio_bus 90000.mdio:03: GPIO lookup for consumer reset
[    1.486973] mdio_bus 90000.mdio:03: using device tree for GPIO lookup
[    1.486988] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@90000/ethernet-phy@2[0]'
[    1.487002] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@90000/ethernet-phy@2[0]'
[    1.487010] mdio_bus 90000.mdio:03: using lookup tables for GPIO lookup
[    1.487016] mdio_bus 90000.mdio:03: No GPIO consumer reset found
[    1.487273] mdio_bus 90000.mdio:04: GPIO lookup for consumer reset
[    1.487279] mdio_bus 90000.mdio:04: using device tree for GPIO lookup
[    1.487295] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@90000/ethernet-phy@3[0]'
[    1.487308] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@90000/ethernet-phy@3[0]'
[    1.487316] mdio_bus 90000.mdio:04: using lookup tables for GPIO lookup
[    1.487322] mdio_bus 90000.mdio:04: No GPIO consumer reset found
[    1.487392] qca-mdio 90000.mdio: qca-mdio driver was registered
[    1.487967] dwc3-qcom 8af8800.usb3: GPIO lookup for consumer device-power
[    1.487973] dwc3-qcom 8af8800.usb3: using device tree for GPIO lookup
[    1.487988] of_get_named_gpiod_flags: can't parse 'device-power-gpios' property of node '/soc/usb3@8A00000[0]'
[    1.488003] of_get_named_gpiod_flags: can't parse 'device-power-gpio' property of node '/soc/usb3@8A00000[0]'
[    1.488011] dwc3-qcom 8af8800.usb3: using lookup tables for GPIO lookup
[    1.488017] dwc3-qcom 8af8800.usb3: No GPIO consumer device-power found
[    1.490647] usbcore: registered new interface driver uas
[    1.492140] usbcore: registered new interface driver usb-storage
[    1.497676] i2c /dev entries driver
[    1.504293] qcom-tsens 4a9000.thermal-sensor: tsens device is not enabled
[    1.507616] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.514622] qti_scm_restart_reason qti,scm_restart_reason: reset_reason : Power on Reset [0x20]
[    1.524993] sdhci: Secure Digital Host Controller Interface driver
[    1.530730] sdhci: Copyright(c) Pierre Ossman
[    1.536989] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.541588] sdhci_msm 7804000.sdhci: GPIO lookup for consumer wp
[    1.541594] sdhci_msm 7804000.sdhci: using device tree for GPIO lookup
[    1.541612] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/sdhci@7804000[0]'
[    1.541626] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/sdhci@7804000[0]'
[    1.541635] sdhci_msm 7804000.sdhci: using lookup tables for GPIO lookup
[    1.541642] sdhci_msm 7804000.sdhci: No GPIO consumer wp found
[    1.541691] sdhci_msm 7804000.sdhci: sdhci_msm_get_ice_device_vops: ICE device is not enabled
[    1.577335] mmc0: SDHCI controller on 7804000.sdhci [7804000.sdhci] using ADMA 64-bit
[    1.580451] 
[    1.580451] Version Rollback Feature Disabled
[    1.588243] remoteproc remoteproc0: d100000.remoteproc is available
[    1.591154] remoteproc remoteproc1: 4ab000.remoteproc_pd1 is available
[    1.596726] coresight-tmc 4047000.etf: invalid cti data
[    1.605421] coresight coresight-etm0: CPU0: ETM v4.0 initialized
[    1.607745] coresight-etm4x 509c000.etm: CPU0: (null) initialized
[    1.614293] coresight coresight-etm1: CPU1: ETM v4.0 initialized
[    1.620052] coresight-etm4x 509d000.etm: CPU1: (null) initialized
[    1.626412] coresight coresight-etm2: CPU2: ETM v4.0 initialized
[    1.632051] coresight-etm4x 509e000.etm: CPU2: (null) initialized
[    1.638510] coresight coresight-etm3: CPU3: ETM v4.0 initialized
[    1.644117] coresight-etm4x 509f000.etm: CPU3: (null) initialized
[    1.650459] coresight-stm 4002000.stm: coresight-stm : stm_register_device failed, probing deferred
[    1.656408] OF: graph: no port node found in /soc/cti@5098000
[    1.665247] OF: graph: no port node found in /soc/cti@5099000
[    1.671097] OF: graph: no port node found in /soc/cti@509a000
[    1.676848] OF: graph: no port node found in /soc/cti@509b000
[    1.682801] OF: graph: no port node found in /soc/csr@4001000
[    1.688235] coresight-csr 4001000.csr: CSR initialized: coresight-csr
[    1.695486] NET: Registered protocol family 10
[    1.700908] Segment Routing with IPv6
[    1.704702] NET: Registered protocol family 17
[    1.708391] Bridge firewalling registered
[    1.712688] 8021q: 802.1Q VLAN Support v1.8
[    1.716571] mmc0: new HS200 MMC card at address 0001
[    1.716819] Mass Storage accelerater start.
[    1.721251] mmcblk0: mmc0:0001 SCA128 116 GiB 
[    1.730170] mmcblk0boot0: mmc0:0001 SCA128 partition 1 4.00 MiB
[    1.734724] mmcblk0boot1: mmc0:0001 SCA128 partition 2 4.00 MiB
[    1.740338] mmcblk0rpmb: mmc0:0001 SCA128 partition 3 4.00 MiB, chardev (240:0)
[    1.741602] qcom-pcie 18000000.pcie: GPIO lookup for consumer perst
[    1.746151] qcom-pcie 18000000.pcie: using device tree for GPIO lookup
[    1.746174] of_get_named_gpiod_flags: can't parse 'perst-gpios' property of node '/soc/pcie@18000000[0]'
[    1.746202] of_get_named_gpiod_flags: parsed 'perst-gpio' property of node '/soc/pcie@18000000[0]' - status (0)
[    1.746456] qcom-pcie 18000000.pcie: IRQ mdm2ap_e911 not found
[    1.747238] GPT: device [179:23] (rootfs) set to be root filesystem
[    1.753413] qcom-pcie 18000000.pcie: host bridge /soc/pcie@18000000 ranges:
[    1.759320]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23
[    1.772456] qcom-pcie 18000000.pcie:    IO 0x18200000..0x182fffff -> 0x18200000
[    1.782165] qcom-pcie 18000000.pcie:   MEM 0x18300000..0x1fffffff -> 0x18300000
[    2.026200] qcom-pcie 18000000.pcie: Link up
[    2.026342] qcom-pcie 18000000.pcie: PCI host bridge to bus 0001:00
[    2.029530] pci_bus 0001:00: root bus resource [bus 00-ff]
[    2.035537] pci_bus 0001:00: root bus resource [io  0x0000-0xfffff] (bus address [0x18200000-0x182fffff])
[    2.041076] pci_bus 0001:00: root bus resource [mem 0x18300000-0x1fffffff]
[    2.050741] pci 0001:00:00.0: [17cb:1005] type 01 class 0x060400
[    2.057508] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    2.063644] pci 0001:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    2.069694] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    2.079857] pci 0001:01:00.0: [17cb:1109] type 00 class 0x028000
[    2.082273] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    2.088406] pci 0001:01:00.0: Max Payload Size set to 256 (was 128, max 256)
[    2.095260] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    2.105783] pci 0001:00:00.0: BAR 8: assigned [mem 0x18400000-0x185fffff]
[    2.108004] pci 0001:00:00.0: BAR 9: assigned [mem 0x18600000-0x187fffff 64bit pref]
[    2.114786] pci 0001:00:00.0: BAR 1: assigned [mem 0x18300000-0x1830ffff]
[    2.122587] pci 0001:00:00.0: BAR 0: assigned [mem 0x18310000-0x18310fff]
[    2.129280] pci 0001:00:00.0: BAR 7: assigned [io  0x1000-0x1fff]
[    2.136053] pci 0001:01:00.0: BAR 0: assigned [mem 0x18400000-0x185fffff 64bit]
[    2.142157] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    2.149241] pci 0001:00:00.0:   bridge window [io  0x1000-0x1fff]
[    2.154441] pci 0001:00:00.0:   bridge window [mem 0x18400000-0x185fffff]
[    2.160701] pci 0001:00:00.0:   bridge window [mem 0x18600000-0x187fffff 64bit pref]
[    2.167556] PCIe: RC enabled during bootup
[    2.175466] qcom-pcie 18000000.pcie: Received Link up event for RC 0
[    2.178283] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
[    2.185854] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1100000 KHz
[    2.192916] coresight-tmc 4048000.tmc: invalid cti data
[    2.201458] sps_register_bam_device: sps:BAM 0x0000000004064000 is registered
[    2.206843] coresight coresight-stm: STM32 initialized
[    2.214297] hctosys: unable to open rtc device (rtc0)
[    2.219203] ALSA device list:
[    2.223876]   No soundcards found.
[    2.228934] VFS: Mounted root (squashfs filesystem) readonly on device 179:23.
[    2.230310] Freeing unused kernel memory: 640K
[    2.264710] Run /sbin/init as init process
[    2.378476] init: Console is alive
[    2.378688] init: - watchdog -
[    3.287121] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.300481] Button Hotplug driver version 0.4.1
[    3.301315] raid6: using algorithm neonx8 gen() 0 MB/s
[    3.303804] raid6: .... xor() 0 MB/s, rmw enabled
[    3.309064] raid6: using neon recovery algorithm
[    3.315849] xor: measuring software checksum speed
[    3.414646]    8regs     :  2877.200 MB/sec
[    3.514645]    32regs    :  3536.400 MB/sec
[    3.614656]    arm64_neon:  3057.200 MB/sec
[    3.614669] xor: using function: 32regs (3536.400 MB/sec)
[    3.659230] Btrfs loaded, crc32c=crc32c-generic
[    3.664364] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_keys/joy[0]' - status (0)
[    3.664383] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_keys/reset[0]' - status (0)
[    3.664401] gpio-490 (joy): gpiod_set_debounce: missing set() or set_config() operations
[    3.664409] gpio-491 (reset): gpiod_set_debounce: missing set() or set_config() operations
[    3.665122] ipq5332-pinctrl 1000000.pinctrl: pin GPIO_31 already requested by soc:gpio_keys; cannot claim for gpio_keys
[    3.665148] ipq5332-pinctrl 1000000.pinctrl: pin-31 (gpio_keys) status -22
[    3.674706] ipq5332-pinctrl 1000000.pinctrl: could not request pin 31 (GPIO_31) from group gpio31  on device 1000000.pinctrl
[    3.681645] gpio-keys gpio_keys: Error applying setting, reverse things back
[    3.693030] gpio-keys: probe of gpio_keys failed with error -22
[    3.701091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.706135] ehci-fsl: Freescale EHCI Host controller driver
[    3.712756] ehci-platform: EHCI generic platform driver
[    3.721254] libata version 3.00 loaded.
[    3.723266] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led_red@24[0]' - status (0)
[    3.723280] no flags found for gpios
[    3.723354] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led_green@33[0]' - status (0)
[    3.723360] no flags found for gpios
[    3.723404] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led_blue@49[0]' - status (0)
[    3.723409] no flags found for gpios
[    3.724097] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.730325] init: - preinit -
[    6.259244] mount_root: loading kmods from internal overlay
[    6.272813] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    6.273414] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    6.438739] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[    6.438809] block: unable to load configuration (fstab: Entry not found)
[    6.444515] block: attempting to load /tmp/overlay/etc/config/fstab
[    6.451385] block: unable to load configuration (fstab: Entry not found)
[    6.457281] block: attempting to load /etc/config/fstab
[    6.465110] block: unable to load configuration (fstab: Entry not found)
[    6.469164] block: no usable configuration
[    6.476315] block: attempting to load /etc/config/fstab
[    6.480025] block: unable to load configuration (fstab: Entry not found)
[    6.485154] block: no usable configuration
[    6.623880] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce36a
[    6.624396] mount_root: loading kmods from internal overlay
[    6.640928] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    6.641242] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[    6.752021] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[    6.755753] overlayfs: "xino" feature enabled using 32 upper inode bits.
[    6.758176] mount_root: switched to extroot
[    6.800570] procd: - early -
[    6.800613] procd: - watchdog -
[    7.344589] procd: - watchdog -
[    7.344827] procd: - ubus -
[    7.407368] procd: - init -
[    7.491233] cnss: INFO: IPC Logging is disabled!
[    7.492844] cnss[2]: INFO: Platform driver probed successfully. plat 0x0000000000ddda86 tgt 0xfff9
[    7.495489] remoteproc remoteproc2: QCN9224_PCI1 is available
[    7.503890] cnss[38]: INFO: Platform driver probed successfully. plat 0x00000000d3e085a1 tgt 0x1109
[    7.510727] cnss[38]: INFO: PCI device 00000000d876a252 probed successfully
[    7.518888] cnss: INFO: cnss_plat_ipc_qmi_svc_init: CNSS Platform IPC QMI Service is started
[    7.721142] urngd: v1.0.2 started.
[    7.845963] kmodloader: loading kernel modules from /etc/modules.d/*
[    7.865079] cnss: INFO: cnss_plat_ipc_qmi_reg_client_req_handler: QMI Client Connected. QMI Socket Node: 1 Port: 16393 ID: 1
[    7.865106] cnss: INFO: CNSS Daemon connected
[    7.877172] cnss: INFO: cnss_plat_ipc_qmi_init_setup_req_handler: MAC: 0 HW_TRC: 0 CAL: 0
[    7.964072] ssdk_dt_parse_led[1060]:INFO:current dts led_source_num is 1
[    7.967353] qca808x_phy_api_ops_init[2755]:INFO:qca probe qca808x phy driver succeeded!
[    7.972077] qca808x_ptp_register[1331]:INFO:qca808x phydev 90000.mdio:04 ptp clock registered
[    8.216975] qca_appe_tdm_hw_init[279]:INFO:mppe scheduler tdm mode = 0, num = 10
[    8.217000] qca_appe_tdm_hw_init[321]:INFO:mppe bm mode = 0 setup num= 32
[    8.348384] _adpt_mppe_uniphy_clk_output_set[1213]:INFO:uniphy will output clock as 0Hz
[    8.348403] qca_hppe_interface_mode_init[1481]:INFO:mppe interface mode initialization
[    8.699804] qca_appe_portctrl_hw_init[407]:INFO:appe portctrl initialization
[    8.701810] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:ffc, ssdk_led_src_id:5
[    8.706930] qca_appe_rss_hash_hw_init[595]:INFO:appe rss hash initialization: hash_seed 0x7e7d1003
[    8.713992] regi_init[4007]:INFO:Initializing APPE Done!!
[    8.722822] ssdk_dt_parse_mac_mode[298]:INFO:mac mode2 doesn't exit!
[    8.728236] ssdk_dt_parse[1193]:INFO:switch node is qca8386!
[    8.734645] ssdk_dt_parse_led[1060]:INFO:current dts led_source_num is 3
[    8.867063] mht_interface_mac_mode_set[756]:INFO:the uniphy0 is used for switch bypass
[    8.943723] ssdk_mht_gcc_clock_init[1338]:INFO:MHT GCC CLK initialization with clock mode 32 on port bmp 0x3f
[    8.944611] mht_pinctrl_clk_gate_set[329]:INFO:[mht_pinctrl_clk_gate_set] gate_en:1
[    8.945049] mht_pinctrl_rev_check[347]:INFO:[mht_pinctrl_rev_check] version_id:0x0 mfg_id:0x70 start_bit:0x1
[    8.952597] mht_pinctrl_rev_check[350]:INFO: Pinctrl Version Check Pass
[    8.972973] ssdk_mht_pinctrl_init[397]:INFO: ssdk_mht_pinctrl_init done
[    8.979143] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:ffc, ssdk_led_src_id:2
[    8.983648] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:ffc, ssdk_led_src_id:5
[    8.992163] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:ffc, ssdk_led_src_id:8
[    9.002500] of_get_named_gpiod_flags: parsed 'link-intr-gpio' property of node '/soc/ess-instance/ess-switch1@1[0]' - status (0)
[    9.002516] gpio-482 (linkchange): gpiod_set_debounce: missing set() or set_config() operations
[    9.002571] ssdk_switch_register[2114]:INFO:interrupt is selected
[    9.016597] ssdk_switch_register[2157]:INFO:mac_sw_sync is not enabled on chip 0x1700
[    9.016612] regi_init[3999]:INFO:Initializing MHT Done!!
[    9.023439] regi_init[4075]:INFO:qca-ssdk module init succeeded!
[    9.030792] nat46: module (version 1182f30785e4274913f01a8c3d7e1b5437ae3819) loaded.
[    9.035879] PPP generic driver version 2.4.2
[    9.042952] NET: Registered protocol family 24
[    9.053818] PPE-RULE module loaded successfully
[    9.060420] zram: Added device: zram0
[    9.087707] NET: Registered protocol family 15
[    9.088768] Initializing XFRM netlink socket
[    9.092215] tun: Universal TUN/TAP device driver, 1.6
[    9.111996] dp1: ppe offload disabled: 0 for macid 2
[    9.112017] dp1: Switch attached to macid 2 status: 0
[    9.116241] (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256
[    9.121450] ppe_port_vsi_get[477]:INFO:VSI is not configured on port 0x2
[    9.132000] dp2: ppe offload disabled: 0 for macid 1
[    9.135904] dp2: Switch attached to macid 1 status: 1
[    9.140903] ppe_port_vsi_get[477]:INFO:VSI is not configured on port 0x1
[    9.146602] **********************************************************
[    9.152558] * NSS Data Plane driver
[    9.158903] **********************************************************
[    9.168587] l2tp_core: L2TP core driver, V2.0
[    9.169403] l2tp_netlink: L2TP netlink interface
[    9.174170] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    9.183794] gre: GRE over IPv4 demultiplexor driver
[    9.184598] ip_gre: GRE over IPv4 tunneling driver
[    9.190314] ip6_gre: GRE over IPv6 tunneling driver
[    9.195671] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    9.222338] cryptodev: driver 1.14 loaded.
[    9.315892] ppe_ds_module_init[90]:PPE-DS module loaded successfully 32768
[    9.321573] TRACK: P[0]	PMask[4]
[    9.327338] TRACK: P[1]	PMask[4]
[    9.330707] TRACK: P[2]	PMask[4]
[    9.334091] TRACK: P[3]	PMask[4]
[    9.337141] TRACK: P[4]	PMask[4]
[    9.340343] TRACK: P[5]	PMask[4]
[    9.343554] TRACK: P[6]	PMask[4]
[    9.349551] cannot find nss-macsec0 node
[    9.350033] cannot find nss-macsec1 node
[    9.353933] cannot find nss-macsec2 node
[    9.357870] cannot find nss-macsec3 node
[    9.361696] nss_macsec init success
[    9.367530] ppe_acl_rule_create[2254]:00000000067a6aa2: rule create request: 000000009f03e0e0
[    9.367536] ppe_acl_rule_create[2313]:00000000067a6aa2: number of slice needed: 1
[    9.368824] ppe_acl_rule_cmn_fill[1527]:000000001f52163f: cmn_flags: 0x0 setting post_routing: 0, pri: 1 
[    9.384978] ppe_acl_rule_create[2346]:00000000067a6aa2: ppe acl rule context: 00000000843f42a8
[    9.384982] ppe_acl_rule_src_fill[1468]:000000009f03e0e0: Binding ACL rule to servcie code number: 23
[    9.403052] ppe_acl_rule_create[2404]:00000000067a6aa2: using free rule_id : 0
[    9.403054] ppe_acl_rule_create[2420]:00000000067a6aa2: ACL rule created with rule ID: 0
[    9.412324] ppe_tun_module_init[1518]:ppe tunnel driver initialized
[    9.420769] nss_ppe_vxlanmgr_init_module[152]:Module Build Id: 08/31/25, 16:02:11 loaded
[    9.434232] nss_ppe_tunipip6_dev_event[169]:00000000591190ab: IPIP6 tunnel creation skipped for fb dev ip6tnl0
[    9.442572] Mirror/redirect action on
[    9.454721] u32 classifier
[    9.455532]     input device check on
[    9.458138]     Actions configured
[    9.464998] usbcore: registered new interface driver cdc_wdm
[    9.468078] usbcore: registered new interface driver qmi_wwan_q
[    9.471850] usbcore: registered new interface driver qmi_wwan_f
[    9.477256] usbcore: registered new interface driver qmi_wwan_s
[    9.484979] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    9.488448] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    9.494099] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
[    9.501660] xhci-hcd xhci-hcd.0.auto: irq 92, io mem 0x08a00000
[    9.501781] usbcore: registered new interface driver cdc_acm
[    9.511379] hub 1-0:1.0: USB hub found
[    9.516829] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    9.526331] hub 1-0:1.0: 1 port detected
[    9.526963] usbcore: registered new interface driver cdc_ether
[    9.534389] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    9.544006] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    9.544627] usbcore: registered new interface driver cdc_ncm
[    9.549482] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    9.549528] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    9.569651] hub 2-0:1.0: USB hub found
[    9.577537] hub 2-0:1.0: 1 port detected
[    9.577672] usbcore: registered new interface driver huawei_cdc_ncm
[    9.587225] usbcore: registered new interface driver ipheth
[    9.594311] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    9.605726] PPP MPPE Compression module registered
[    9.606950] PPTP driver version 0.8.5
[    9.610481] usbcore: registered new interface driver rndis_host
[    9.613964] usbcore: registered new interface driver ums-alauda
[    9.619272] usbcore: registered new interface driver ums-cypress
[    9.625112] usbcore: registered new interface driver ums-datafab
[    9.631309] usbcore: registered new interface driver ums-freecom
[    9.637348] usbcore: registered new interface driver ums-isd200
[    9.643295] usbcore: registered new interface driver ums-jumpshot
[    9.648937] usbcore: registered new interface driver ums-karma
[    9.655253] usbcore: registered new interface driver ums-sddr09
[    9.660921] usbcore: registered new interface driver ums-sddr55
[    9.666812] usbcore: registered new interface driver ums-usbat
[    9.672797] usbcore: registered new interface driver usblp
[    9.680215] usbcore: registered new interface driver usbserial_generic
[    9.683725] usbserial: USB Serial support registered for generic
[    9.705103] xt_time: kernel timezone is -0000
[    9.705879] usbcore: registered new interface driver cdc_mbim
[    9.717001] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    9.717023] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    9.724575] usbcore: registered new interface driver option
[    9.733575] usbserial: USB Serial support registered for GSM modem (1-port)
[    9.739379] usbcore: registered new interface driver qcserial
[    9.745725] usbserial: USB Serial support registered for Qualcomm USB modem
[    9.751783] kmodloader: done loading kernel modules from /etc/modules.d/*
[   10.226339] loading qca-wifi
[   11.701850] wlan: [1167:I:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: Could not find active PSOCs
[   11.701876] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   11.709717] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   11.718127] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   11.726537] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   11.734964] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   11.743370] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   11.751796] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   11.760216] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   11.768636] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   11.777057] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   11.785476] wlan: [1167:I:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: Could not find active PSOCs
[   11.793891] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   11.802665] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   11.811085] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   11.819504] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   11.827924] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   11.836344] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   11.844764] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   11.853180] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   11.861605] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   11.870025] wlan: [1167:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   11.885688] wlan: [1167:I:ANY] qdf_ini_parse: INI values read: 98
[   11.886857] wlan: [1167:I:ANY] qdf_ini_parse: INI file parse successful
[   11.896593] wlan: [1167:I:ANY] qdf_ini_parse: INI values read: 60
[   11.899270] wlan: [1167:I:ANY] qdf_ini_parse: INI file parse successful
[   11.914511] wlan: [1172:I:ANY] register_telemetry_agent_ops: Registered Telemetry Agent ops: 000000009c0db718
[   11.916233] SAWF Telemetry: SAWF ctx is initialized
[   12.032989] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x38 Value: 0
[   12.033016] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x38 Param 3 Value: 0
[   12.041903] cnss[38]: INFO: Setting cold_boot_support=0 for instance_id 0x38
[   12.285468] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 6 Instance ID: 0x38 Value: 1
[   12.285494] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x38 Param 6 Value: 1
[   12.294349] cnss[38]: INFO: Setting qdss_support=1 for instance_id 0x38
[   12.338091] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 6 Instance ID: 0x2 Value: 1
[   12.338119] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x2 Param 6 Value: 1
[   12.346674] cnss[2]: INFO: Setting qdss_support=1 for instance_id 0x2
[   12.574558] ./IPQ5332/regdb.bin ./qcn9224/amss.bin ./qcn9224/amss_dualmac.bin ./qcn9224/regdb.bin
[   74.714780] wlan: [1636:E:ANY] qdf_file_read: Failed to read file mlo_config.ini
[   74.714803] wlan: [1636:E:ANY] qdf_ini_parse: Failed to read *.ini file @ mlo_config.ini
[   74.721231] wlan: [1636:I:ANY] init_mlo_cfg: Set default MLO config
[   74.729336] cnss[2]: INFO: cnss_set_static_mlo_config: Default MLO Config updated for QCA5332
[   74.729338] cnss[38]: INFO: cnss_set_static_mlo_config: Default MLO Config updated for QCN9224_PCI1
[   74.735299] cnss[38]: INFO: Default MLO configuration is set!
[   74.743975] wlan: [1636:I:ANY] =======ol_if_register_wifi3_0==========
[   74.743975] 
[   74.758752] wlan: [1636:I:ANY] mlo_setup_update_total_socs: Grp_id 0 Total MLO socs = 2 links = 0
[   74.766570] remoteproc remoteproc1: powering up 4ab000.remoteproc_pd1
[   74.785650] remoteproc remoteproc1: Booting fw image IPQ5332/q6_fw1.mdt, size 4232
[   74.785724] wlan: [1636:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   74.792109] remoteproc remoteproc0: powering up d100000.remoteproc
[   74.798760] remoteproc remoteproc0: Booting fw image IPQ5332/q6_fw0.mdt, size 15472
[   74.804819] smem phyiscal address:0x4A83B198
[   74.812388] qcom-q6-mpd d100000.remoteproc: Error in loading file () : -22, Assuming no license mode
[   74.994539] Subsystem error monitoring/handling services are up
[   74.995979] No Features are licensed in node 0x7
[   74.996222] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 000000005a6fc6df
[   75.004263] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 2
[   75.114659] remoteproc remoteproc0: remote processor d100000.remoteproc is now up
[   75.850032] Subsystem error monitoring/handling services are up
[   75.879947] cnss[2]: INFO: QMI WLFW service connected, state: 0x10001
[   75.880225] cnss[2]: INFO: device_id : 0xfff9 mem mode : [0]
[   75.885363] cnss[2]: INFO: platform name: JDCloud BE6500
[   75.885370] cnss[2]: INFO: MLO Capabilities added to QMI Host Cap msg
[   75.896741] cnss[2]: ERR: WARNING: More memory is reserved. Reserved size 0x2300000, Requested size 0x1ddc000.
[   75.902773] cnss[2]: ERR: WARNING: More MLO global memory is reserved. Reserved size 0x1100000, Requested size 0xc00000.
[   75.924516] cnss[2]: INFO: Device memory info[0]: start = 0x10a000, size = 0x2000
[   75.924532] cnss[2]: INFO: Device memory info[1]: start = 0x0, size = 0x0
[   75.931015] cnss[2]: INFO: Device memory info[2]: start = 0x0, size = 0x0
[   75.937786] cnss[2]: INFO: Device memory info[3]: start = 0x0, size = 0x0
[   75.944552] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0xb, board_id: 0xff, soc_id: 0x201a0101, fw_version: 0x11097fff, fw_build_timestamp: 2024-03-18 11:33, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 1 rxgainlut_support 1
[   75.960594] cnss[2]: INFO: Downloading BDF: IPQ5332/regdb.bin, size: 25656
[   75.964692] wlan: [1636:I:ANY] ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   75.980643] cnss[2]: INFO: Downloading BDF: IPQ5332/bdwlan.b16, size: 63488
[   75.982778] wlan: [1636:I:ANY] ol_ath_wifi_ssr: Waiting for probe lock
[   75.996140] wlan: [1636:I:ANY] ol_ath_wifi_ssr: Starting Driver Probe
[   76.002724] cnss[2]: INFO: Waiting for FW ready. Device: 0xfff9, FW ready timeout: 15 seconds
[   76.003421] cnss[2]: INFO: Downloading BDF: IPQ5332/caldata.bin, size: 131072
[   76.124656] cnss[2]: INFO: FW ready received for device 0xfff9
[   76.124837] wlan: [1636:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode 
[   76.129642] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x10007
[   76.178722] cnss[2]: INFO: Starting QDSS for QCA5332
[   76.178735] cnss[2]: INFO: Sending QDSS config download message, state: 0x10007
[   76.182856] cnss[2]: INFO: No Custom QDSS config found, loading default file IPQ5332/qdss_trace_config.bin
[   76.189818] cnss[2]: INFO: Failed to load QDSS Config: IPQ5332/qdss_trace_config.bin ret:-2
[   76.199883] wlan: [1636:I:ANY] qca_napi_create: napi instance 0 created on pipe 4
[   76.208040] wlan: [1636:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   76.226359] wlan: [1636:I:ANY] qdf_ini_parse: INI values read: 0
[   76.226380] wlan: [1636:I:ANY] qdf_ini_parse: INI file parse fail: invalid file format
[   76.232131] wlan: [1636:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA5332.ini; status:4
[   76.253111] wlan: [1636:I:ANY] qdf_ini_parse: INI values read: 95
[   76.253126] wlan: [1636:I:ANY] qdf_ini_parse: INI file parse successful
[   76.258256] wlan: [1636:I:ANY] mlo_setup_update_num_links: Grp_id 0 Total MLO links = 1
[   76.264855] wlan: [1636:I:ANY] ol_ath_soc_attach: WDS Extended is enabled
[   76.272577] wlan: [1636:I:ANY] osif_mldev_register_ops: MLD netdev AP mode 1
[   76.279527] wlan: [1636:I:ANY] osif_mldev_register_ops: MLD netdev STA mode 1
[   76.324770] wlan: [1636:I:ANY] ol_target_init_complete: CDP soc attach success
[   76.325411] wlan: [778:E:TIF] init_deinit_pdev_wsi_stats_info_support: wmi_service_pdev_wsi_stats_info_support is not enabled for PSoc 0
[   76.330912] wlan: [778:I:TIF] HE_CAP Info = 9a18010d
[   76.343311] wlan: [778:I:TIF] Num HW modes = 1
[   76.348236] wlan: [778:I:TIF] Num PHY = 1
[   76.352483] wlan: [778:I:TIF] FW Build Version (Ext.) = 33554690
[   76.356572] wlan: [778:I:TIF] HDL Version: MajorVersion.MinorVersion = 2.4
[   76.362644] wlan: [778:I:TIF] 11BE suport 1 
[   76.369331] wlan: [778:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   76.373783] wlan: [778:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   76.379760] wlan: [778:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   76.393210] wlan: [778:I:ANY] BDF version: 1 CAL version: 1 Status: 0
[   76.402497] wlan: [778:E:TIF] tgt_if_set_reg_afc_configure: service afc support not enable
[   76.410918] wlan: [778:I:ANY] Rx FST attach successful, #entries:2048
[   76.410918] 
[   76.417171] wlan: [778:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   76.425281] wlan: [778:I:ANY] qdf_ini_section_parse: INI values parse successful read: 5 from section 2G
[   76.432269] wlan: [778:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0
[   76.441907] wlan: [778:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override & RNR_SIZE_LIMIT_OVERRIDE_MASK:>0
[   76.449652] wlan: [778:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0 
[   76.460225] wlan: [778:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1
[   76.466997] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.472803] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.482880] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.492864] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.502842] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.512826] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.522807] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.532831] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.542774] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.553107] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.562759] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.572729] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.582705] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.592687] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.602670] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.612652] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   76.622635] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x77777777
[   76.632615] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x77777777
[   76.641922] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 128
[   76.651628] wlan: [778:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 166
[   76.660395] wlan: [778:I:MBSSIE] ol_ath_ema_init_ctx:  max_pp:1  max_ngroups:1 
[   76.669506] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max mgmt frame size :2000
[   76.676539] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: common_part_sz      :800
[   76.684877] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz       :1200
[   76.693201] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :294
[   76.701454] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp              :1
[   76.709795] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn:   4
[   76.718032] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 4
[   76.726452] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp:      4
[   76.734959] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup:               4
[   76.743460] wlan: [778:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz:                   4
[   76.751991] wlan: [778:I:MBSSIE] ol_ath_ema_init_ctx: rnr_6ghz_adv_override:0
[   76.760602] wlan: [778:I:ANY] qdf_ini_section_parse: INI values parse successful read: 0 from section SINGLE_PHY_2G
[   76.767616] wlan: [778:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   76.777855] wlan: [778:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   76.785139] wlan: [778:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   76.793114] wlan: [778:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   76.800852] wlan: [778:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   76.807877] wlan: [778:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   76.815863] wlan: [778:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   76.823580] wlan: [778:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   76.830620] wlan: [778:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   76.838604] wlan: [778:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   76.846328] wlan: [778:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   76.853357] wlan: [778:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   76.870682] wlan: [778:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   77.020339] wlan: [778:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   77.020379] wlan: [778:E:TIF] init_deinit_ready_event_handler: Host Requested 529 peers. FW Supports 288 peers
[   77.027971] wlan: [778:I:ANY] mlo_setup_link_ready: Pdev updated to Grp id 0 mld link 0 num_links 1  hw link id 0 Valid link bitmap 1
[   77.037986] wlan: [1636:I:ANY] ol_ath_soc_attach: PUMAC skip
[   77.049756] wlan: [1636:I:ANY] __ol_ath_attach: soc(0x0000000067990214): soc0 pdev: wifi0
[   77.056368] wlan: [1636:I:ANY] ol_ath_cohost_bssid_ind_init: COHOSTED BSSID IND disabled for pdev[0]
[   77.063510] wlan: [1636:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   77.072717] wlan: [1636:I:TIF] ol_ath_pdev_regdmn_init:  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[   77.080098] wlan: [1636:I:TIF] ol_ath_pdev_regdmn_init:  11be = 1
[   77.089814] wlan: [1636:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 1, modes = d0680680c, lo_2ghz = 2312, hi_2ghz = 2732 lo_5ghz = 0, hi_5ghz = 0
[   77.095988] wlan: [1636:I:ANY] ol_ath_update_ext_eht_caps: 11be 2G supported case
[   77.110737] wlan: [1636:I:TIF] ol_ath_update_ic_ehtcap_mcsnssmap_from_target: bwidx = 0 mcsnssmap 20222222 rxmap 222 txmap 2222
[   77.118291] wlan: [1636:I:TIF] ol_ath_update_ic_ehtcap_mcsnssmap_from_target: bwidx = 1 mcsnssmap 202222 rxmap 222 txmap 2222
[   77.129817] wlan: [1636:I:MBSSIE] ieee80211_mbss_attach: :>
[   77.141029] wlan: [1636:I:MBSSIE] ieee80211_mbss_attach: :<ret:0
[   77.147043] wlan: [1636:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[   77.152712] of_get_named_gpiod_flags: parsed 'led-gpio' property of node '/soc/wifi@c0000000[0]' - status (0)
[   77.153251] wlan: [1636:E:CFR] wlan_cfr_pdev_open: cfr is disabled
[   77.159350] wlan: [1636:I:ANY] ol_ath_pdev_host_trig_txbf_sounding_init: TxBF Standalone Sounding is not enabled
[   77.165528] wlan: [1636:I:ANY] ol_ath_pdev_attach: Registered peer wdi events
[   77.175945] wlan: [1636:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   77.182988] wlan: [1636:I:ANY] ieee80211_cfg80211_mld_wiphy_update_band: Number of 2G Channels: 11 5G Channels: 0 6G Channels: 0 
[   77.193189] wlan: [1636:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   77.203923] remoteproc remoteproc1: remote processor 4ab000.remoteproc_pd1 is now up
[   77.213234] remoteproc remoteproc2: powering up QCN9224_PCI1
[   77.270055] ***** Fast boot VAP mode is disabled wifi0 *****
[   77.787487] remoteproc remoteproc2: Booting fw image qcn9224/amss.bin, size 7319552
[   77.787556] wlan: [1636:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 0
[   77.794001] cnss_pci 0001:01:00.0: BAR 0: assigned [mem 0x18400000-0x185fffff 64bit]
[   77.800645] cnss_pci 0001:01:00.0: enabling device (0000 -> 0002)
[   77.809899] cnss_pci 0001:01:00.0: DMA Memory initialized at 0x000000007f700000 size 0x900000
[   77.814616] cnss[38]: INFO: SOC VERSION INFO: Family num: 0x4, Device num: 0x1a, Major Ver: 0x2, Minor Ver: 0x0
[   77.822997] cnss[38]: INFO: Setting 0x31 to QRTR_NODE_ID_REG
[   77.832838] cnss[38]: INFO: Value from QRTR_NODE_ID_REG: 0x31
[   77.838741] mhi mhi0: Requested to power ON
[   77.844543] mhi mhi0: Power on setup success
[   77.952119] mhi mhi0: qrtr_instance_id not defined in DT, ret:-22
[   77.958566] mhi mhi0: Wait for device to enter SBL or Mission mode
[   77.958766] mhi mhi0: boot-args not defined in DTS. ret:-22
[   77.963629] mhi mhi0: License file or ftm-mode not present in DTS node,Assuming no License or ftm mode
[   78.659672] cnss[38]: INFO: MHI status cb is called with reason MISSION MODE(5)
[   78.659888] mhi_uci mhi0_LOOPBACK: channel:LOOPBACK successfully probed
[   78.669038] No Features are licensed in node 0x38
[   78.669067] cnss[38]: INFO: QMI WLFW service connected, state: 0x10011
[   78.678561] cnss[38]: INFO: FW INI CFG file qcn9224/fw_ini_cfg.bin is present
[   78.683664] cnss[38]: INFO: device_id : 0x1109 mem mode : [0]
[   78.690887] cnss[38]: INFO: platform name: JDCloud BE6500
[   78.690895] cnss[38]: INFO: MLO Capabilities added to QMI Host Cap msg
[   78.703130] cnss[38]: INFO: FW File 0 download
[   78.774670] wlan: [1636:I:ANY] ol_ath_wifi_ssr: SSR event 3 bus_type 0
[   78.774694] wlan: [1636:I:ANY] ol_ath_wifi_ssr: Waiting for probe lock
[   78.780071] wlan: [1636:I:ANY] ol_ath_wifi_ssr: Starting Driver Probe
[   78.786594] cnss[38]: INFO: Waiting for FW ready. Device: 0x1109, FW ready timeout: 15 seconds
[   78.955245] cnss[38]: INFO: Device memory info[0]: start = 0x10e000, size = 0x2000
[   78.955260] cnss[38]: INFO: Device memory info[1]: start = 0x0, size = 0x0
[   78.961686] cnss[38]: INFO: Device memory info[2]: start = 0x0, size = 0x0
[   78.968561] cnss[38]: INFO: Device memory info[3]: start = 0x0, size = 0x0
[   78.975413] cnss[38]: INFO: Target capability: chip_id: 0x0, chip_family: 0xb, board_id: 0xff, soc_id: 0x401a2200, fw_version: 0x11097fff, fw_build_timestamp: 2024-03-18 11:03, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 1 rxgainlut_support 1
[   78.985134] cnss[38]: INFO: Downloading BDF: qcn9224/regdb.bin, size: 25656
[   79.016795] cnss[38]: INFO: Downloading BDF: qcn9224/bdwlan.b0002, size: 100352
[   79.039104] cnss[38]: INFO: Downloading BDF: qcn9224/caldata_2.bin, size: 184320
[   79.144668] cnss[38]: INFO: FW ready received for device 0x1109
[   79.147124] cnss[38]: INFO: Sending mode message, mode: MISSION(0), state: 0x10017
[   80.199085] cnss[38]: INFO: Starting QDSS for QCN9224_PCI1
[   80.199105] cnss[38]: INFO: Sending QDSS config download message, state: 0x10017
[   80.203567] cnss[38]: INFO: No Custom QDSS config found, loading default file qcn9224/qdss_trace_config.bin
[   80.219515] wlan: [1636:I:ANY] qca_napi_create: napi instance 0 created on pipe 4
[   80.220787] wlan: [1636:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   80.228389] wlan: [1636:I:ANY] qdf_ini_parse: INI values read: 0
[   80.238777] cnss[38]: INFO: Sending QDSS Mode 1, option 0
[   80.238779] wlan: [1636:I:ANY] qdf_ini_parse: INI file parse fail: invalid file format
[   80.250171] wlan: [1636:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCN9224.ini; status:4
[   80.271335] wlan: [1636:I:ANY] qdf_ini_parse: INI values read: 95
[   80.271354] wlan: [1636:I:ANY] qdf_ini_parse: INI file parse successful
[   80.277403] wlan: [1636:I:ANY] qdf_ini_section_parse: INI values parse successful read: 6 from section 512M_OR_DP_MON_4CHAIN
[   80.282856] debugfs: Directory 'CONFIG' with parent 'qdf' already present!
[   80.294294] wlan: [1636:E:QDF] CONFIG creation failed
[   80.301021] wlan: [1636:I:ANY] mlo_setup_update_num_links: Grp_id 0 Total MLO links = 2
[   80.306318] wlan: [1636:I:ANY] ol_ath_soc_attach: WDS Extended is enabled
[   80.313905] wlan: [1636:I:ANY] osif_mldev_register_ops: MLD netdev AP mode 1
[   80.320854] wlan: [1636:I:ANY] osif_mldev_register_ops: MLD netdev STA mode 1
[   80.330653] ffffff802e402f20: PPE-DS alloc successful
[   80.354484] ppe_ds_wlan_inst_register[538]: ppe2tcl num desc: 2048, reo2ppe num desc: 8192, txcmpl budget: 256 rxfill low threshold value: 256
[   80.354829] ppe_ds_get_cur_prod_cons_ring_idx[299]:ffffff802e402f20: PPE-DS get current EDMA ring indices API call successful
[   80.354832] ppe_ds_wlan_inst_register[553]:ffffff802e402f20: PPE-DS register successful
[   80.374459] ppe_ds_wlan_instance_start[727]:ffffff802e402f20: PPE-DS start successful
[   80.385351] wlan: [1636:I:ANY] ol_target_init_complete: CDP soc attach success
[   80.394229] wlan: [7:E:TIF] init_deinit_pdev_wsi_stats_info_support: wmi_service_pdev_wsi_stats_info_support is not enabled for PSoc 1
[   80.400482] wlan: [7:I:TIF] HE_CAP Info = 9a18010d
[   80.412501] wlan: [7:I:TIF] Num HW modes = 1
[   80.417270] wlan: [7:I:TIF] Num PHY = 1
[   80.421693] wlan: [7:I:TIF] FW Build Version (Ext.) = 33554567
[   80.425260] wlan: [7:I:TIF] HDL Version: MajorVersion.MinorVersion = 7.2
[   80.431160] wlan: [7:I:TIF] 11BE suport 1 
[   80.438021] wlan: [7:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   80.441952] wlan: [7:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   80.448101] wlan: [7:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   80.461381] wlan: [7:I:ANY] BDF version: 2 CAL version: 2 Status: 0
[   80.471476] wlan: [7:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   80.476788] wlan: [7:I:ANY] qdf_ini_section_parse: INI values parse successful read: 6 from section 5G
[   80.483771] wlan: [7:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0
[   80.492887] wlan: [7:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override & RNR_SIZE_LIMIT_OVERRIDE_MASK:>0
[   80.500455] wlan: [7:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0 
[   80.510858] wlan: [7:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1
[   80.517805] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.523437] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.533340] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.543155] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.552956] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.562779] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.572574] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.582385] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.592191] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.602001] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.611811] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.621621] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.631427] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.641237] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.651046] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.660859] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   80.670667] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x77777777
[   80.680472] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x77777777
[   80.689587] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 128
[   80.698788] wlan: [7:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 166
[   80.707382] wlan: [7:I:MBSSIE] ol_ath_ema_init_ctx:  max_pp:1  max_ngroups:1 
[   80.716321] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max mgmt frame size :2000
[   80.723522] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: common_part_sz      :800
[   80.731686] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz       :1200
[   80.739845] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :294
[   80.747919] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp              :1
[   80.756078] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn:   4
[   80.763799] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 4
[   80.772050] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp:      4
[   80.780384] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup:               4
[   80.788720] wlan: [7:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz:                   4
[   80.797058] wlan: [7:I:MBSSIE] ol_ath_ema_init_ctx: rnr_6ghz_adv_override:0
[   80.805695] wlan: [7:I:ANY] qdf_ini_section_parse: INI values parse successful read: 1 from section SINGLE_PHY_5G
[   80.812338] wlan: [7:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   80.822749] wlan: [7:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   80.829879] wlan: [7:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   80.837332] wlan: [7:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   80.844887] wlan: [7:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   80.852080] wlan: [7:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   80.859554] wlan: [7:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   80.867104] wlan: [7:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   80.874303] wlan: [7:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   80.881772] wlan: [7:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   80.889325] wlan: [7:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   80.896529] wlan: [7:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   80.913462] wlan: [7:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   81.160525] wlan: [7:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   81.161002] wlan: [7:E:TIF] init_deinit_ready_event_handler: Host Requested 529 peers. FW Supports 145 peers
[   81.167785] wlan: [7:I:ANY] mlo_setup_link_ready: Pdev updated to Grp id 0 mld link 1 num_links 2  hw link id 1 Valid link bitmap 3
[   81.177664] wlan: [7:I:ANY] mlo_setup_link_ready: Trigger MLO Setup request
[   81.189844] wlan: [1636:I:ANY] __ol_ath_attach: soc(0x00000000f062f4a9): soc1 pdev: wifi1
[   81.197233] wlan: [1636:I:ANY] ol_ath_cohost_bssid_ind_init: COHOSTED BSSID IND disabled for pdev[0]
[   81.204495] wlan: [1636:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   81.213691] wlan: [1636:I:TIF] ol_ath_pdev_regdmn_init:  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[   81.221061] wlan: [1636:I:TIF] ol_ath_pdev_regdmn_init:  11be = 1
[   81.230781] wlan: [1636:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 2, modes = f2f97f9001, lo_2ghz = 0, hi_2ghz = 0 lo_5ghz = 5170, hi_5ghz = 5835
[   81.236956] wlan: [1636:I:ANY] ol_ath_update_ext_eht_caps: 11be 5G supported case
[   81.251702] wlan: [1636:I:TIF] ol_ath_update_ic_ehtcap_mcsnssmap_from_target: bwidx = 0 mcsnssmap 44444444 rxmap 4444 txmap 4444
[   81.259344] wlan: [1636:I:TIF] ol_ath_update_ic_ehtcap_mcsnssmap_from_target: bwidx = 1 mcsnssmap 444444 rxmap 4444 txmap 4444
[   81.270976] wlan: [1636:I:TIF] ol_ath_update_ic_ehtcap_mcsnssmap_from_target: bwidx = 2 mcsnssmap 444444 rxmap 4444 txmap 4444
[   81.282173] wlan: [1636:I:TIF] ol_ath_update_ic_ehtcap_mcsnssmap_from_target: bwidx = 3 mcsnssmap 444444 rxmap 4444 txmap 4444
[   81.293813] wlan: [1636:I:MBSSIE] ieee80211_mbss_attach: :>
[   81.304913] wlan: [1636:I:MBSSIE] ieee80211_mbss_attach: :<ret:0
[   81.312068] wlan: [1636:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   81.317232] wlan: [1636:E:CFR] wlan_cfr_pdev_open: cfr is disabled
[   81.323341] wlan: [1636:I:ANY] ol_ath_pdev_host_trig_txbf_sounding_init: TxBF Standalone Sounding is not enabled
[   81.329496] wlan: [1636:I:ANY] ol_ath_pdev_attach: Registered peer wdi events
[   81.339929] wlan: [1636:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   81.346974] wlan: [1636:I:ANY] ieee80211_cfg80211_mld_wiphy_update_band: Number of 2G Channels: 0 5G Channels: 25 6G Channels: 0 
[   81.356800] wlan: [1636:I:ANY] ol_ath_thermal_param_init: Thermal Config for WKK zone 0
[   81.367597] wlan: [1636:I:ANY] ol_ath_thermal_param_init: Thermal Config for WKK zone 1
[   81.375398] wlan: [1636:I:ANY] ol_ath_thermal_param_init: Thermal Config for WKK zone 2
[   81.383380] wlan: [1636:I:ANY] ol_ath_thermal_param_init: Thermal Config for WKK zone 3
[   81.391449] wlan: [1636:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   81.399802] remoteproc remoteproc2: remote processor QCN9224_PCI1 is now up
[   81.422854] wlan: [1765:I:ANY] dp_mon_soc_attach_2_0: dp_mon_soc_attach_2_0:1055 rx mon buf entries: 8192
[   81.422941] wlan: [1765:I:ANY] dp_mon_soc_attach_2_0: dp_mon_soc_attach_2_0:1063 tx mon buf entries: 8192
[   81.431494] wlan: [1765:I:ANY] dp_rx_mon_buf_desc_pool_alloc: dp_rx_mon_buf_desc_pool_alloc:2359 rx mon buf desc pool entries: 8192
[   81.441066] wlan: [1765:I:ANY] dp_tx_mon_buf_desc_pool_alloc: dp_tx_mon_buf_desc_pool_alloc:376 tx mon buf desc pool entries: 8192
[   81.455025] wlan: [1765:I:ANY] dp_mon_soc_attach_2_0: dp_mon_soc_attach_2_0:1055 rx mon buf entries: 8192
[   81.464480] wlan: [1765:I:ANY] dp_mon_soc_attach_2_0: dp_mon_soc_attach_2_0:1063 tx mon buf entries: 8192
[   81.467237] ***** Fast boot VAP mode is disabled wifi1 *****
[   81.474110] wlan: [1765:I:ANY] dp_rx_mon_buf_desc_pool_alloc: dp_rx_mon_buf_desc_pool_alloc:2359 rx mon buf desc pool entries: 8192
[   81.489563] wlan: [1765:I:ANY] dp_tx_mon_buf_desc_pool_alloc: dp_tx_mon_buf_desc_pool_alloc:376 tx mon buf desc pool entries: 8192
[   82.462641] qca-wifi loaded
[   82.846181] zram0: detected capacity change from 0 to 454033408
[   82.914751] Adding 443388k swap on /dev/zram0.  Priority:-2 extents:1 across:443388k SS
[   83.000642] edma_cfg_rx_rps[1591]:EDMA RPS configured to use 3 cores
[   84.275834] ECM init
[   84.275894] ECM database jhash random seed: 0xcf885b36
[   84.278463] ECM init complete
[   84.458213] ppe_port_vsi_get[477]:INFO:VSI is not configured on port 0x1
[   84.459855] br-lan: port 1(eth1.1) entered blocking state
[   84.463968] br-lan: port 1(eth1.1) entered disabled state
[   84.470627] device eth1.1 entered promiscuous mode
[   84.474747] device eth1 entered promiscuous mode
[   84.479582] Set globle Ageing time set to 300 which is same for all bridge
[   84.485101] br-lan: port 1(eth1.1) entered blocking state
[   84.490793] br-lan: port 1(eth1.1) entered forwarding state
[   84.496690] Set globle Ageing time set to 300 which is same for all bridge
[   85.514852] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   87.351737] wlan: [6408:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[   87.351841] wlan: [6408:I:ANY] number of channels: 2G = 11 5G = 0, 6G = 0
[   87.357831] wlan: [6408:I:ANY] wlan_cfg80211_set_country: wlan_cfg80211_set_country: Country: US ret: 0 
[   87.553371] wlan: [6572:I:ANY] wlan_cfg80211_set_hwaddr: Invalid mac address 
[   87.738876] wlan: [6589:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0
[   87.820663] wlan: [0:I:RPTR] RPTR disconnect_timeout:10
[   87.846110] wlan: [0:I:RPTR] RPTR reconfiguration_timeout:60
[   88.020200] wlan: [6760:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   88.020232] wlan: [6760:I:ANY] osifp_create_wlan_vap: VDEV Create 00:03:7f:12:43:43
[   88.026685] wlan: [6760:I:ANY] osifp_create_wlan_vap: mlo_mbssid disabled in lower band radios
[   88.026685] 
[   88.034171] wlan: [6760:I:ANY] wlan_vap_create: devhandle=0x0000000024852544, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   88.034171] 
[   88.044584] wlan: [6760:E:ANY] ol_ath_vdev_set_intra_bss: vdev is NULL!
[   88.056365] wlan: [6760:I:ANY] ol_ath_vap_set_param: VDEV params:EHT su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_ofdma:1|ul_ofdma:1|ulmumimo:1|dl_muofdma_bfer:1|dl_muofdma_mumimo:0|ul_muofdma_mumimo:0
[   88.062655] wlan: [6760:I:ANY] ol_ath_vap_set_param: eht_mu_bf_mode=0xfb
[   88.080527] wlan: [6760:I:ANY] ieee80211_add_vdev_ids: vdev_id:0 pos:0
[   88.087511] wlan: [6760:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   88.144700] wlan: [6760:I:ANY] osif_pltfrm_create_ppe_vp: vp user type: passive vpai.core_mask: 7 target type: 35 vpnum: 64 icp_flags: 100001
[   88.144700] 
[   88.144737] wlan: [6760:I:ANY] osif_pltfrm_create_ppe_vp_802_3_redir_vap: 
[   88.144737] dev:00000000de8bc9c5, dev->name:ath0 osnetdev:00000000269a42a3, allocated VP # 64 
[   88.158032] wlan: [6760:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:0 pdev_id:0
[   90.541102] wlan: [8893:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   90.541443] wlan: [8893:E:ANY] dfs_init_chan_state_array: channel state array initialized
[   90.548672] wlan: [8893:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   90.555345] wlan: [8893:I:ANY] number of channels: 2G = 0 5G = 25, 6G = 0
[   90.561894] wlan: [8893:I:ANY] wlan_cfg80211_set_country: wlan_cfg80211_set_country: Country: US ret: 0 
[   90.746580] wlan: [8919:I:ANY] wlan_cfg80211_set_hwaddr: Invalid mac address 
[   90.771946] wlan: [8922:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0
[   90.843945] wlan: [0:I:RPTR] RPTR disconnect_timeout:10
[   90.867599] wlan: [0:I:RPTR] RPTR reconfiguration_timeout:60
[   90.974973] wlan: [8978:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   90.975005] wlan: [8978:I:ANY] osifp_create_wlan_vap: VDEV Create 00:03:7f:12:ab:ab
[   90.981426] wlan: [8978:I:ANY] osifp_create_wlan_vap: mlo_mbssid disabled in lower band radios
[   90.981426] 
[   90.988993] wlan: [8978:I:ANY] wlan_vap_create: devhandle=0x000000005499f586, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   90.988993] 
[   90.999184] wlan: [8978:E:ANY] ol_ath_vdev_set_intra_bss: vdev is NULL!
[   91.010938] wlan: [8978:I:ANY] ol_ath_vap_set_param: VDEV params:EHT su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_ofdma:1|ul_ofdma:1|ulmumimo:1|dl_muofdma_bfer:1|dl_muofdma_mumimo:0|ul_muofdma_mumimo:0
[   91.017457] wlan: [8978:I:ANY] ol_ath_vap_set_param: eht_mu_bf_mode=0xfb
[   91.035128] wlan: [8978:I:ANY] ieee80211_add_vdev_ids: vdev_id:0 pos:0
[   91.042094] wlan: [8978:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   91.074681] ppe_ds_wlan_vp_alloc[379]:ffffff802e402f20: PPE-DS node mapped start queue-id: 32
[   91.134666] wlan: [8978:I:ANY] osif_pltfrm_create_ppe_vp: vp user type: ds vpai.core_mask: 7 target type: 32 vpnum: 65 icp_flags: 400001
[   91.134666] 
[   91.142172] wlan: [8978:I:ANY] osif_pltfrm_create_ppe_vp_802_3_redir_vap: 
[   91.142172] dev:000000003e3001cf, dev->name:ath1 osnetdev:0000000034b94b46, allocated VP # 65 
[   91.156065] wlan: [8978:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:0 pdev_id:0
[   92.412735] 8021q: adding VLAN 0 to HW filter on device ath0
[   92.413400] br-lan: port 2(ath0) entered blocking state
[   92.417631] br-lan: port 2(ath0) entered disabled state
[   92.422778] device ath0 entered promiscuous mode
[   92.427953] br-lan: port 2(ath0) entered blocking state
[   92.432477] br-lan: port 2(ath0) entered forwarding state
[   92.437745] Set globle Ageing time set to 300 which is same for all bridge
[   92.442992] Set globle Ageing time set to 300 which is same for all bridge
[   92.487148] wlan: [3437:I:ANY] wlan_cfg80211_start_ap: Start ath0 psoc:0 vdev:0
[   92.487191] wlan: [3437:I:ANY] DES SSID SET=QWRT__2.4G
[   92.493255] wlan: [3437:I:ANY] desired hw mode: 40
[   92.498619] wlan: [3437:I:ANY] wlan_cfg80211_chan_to_phymode: band:0 width: 2 channel_cfreq: 2412 center_freq1: 2422 chandef.center_freq2: 0 flags: 416
[   92.503249] wlan: [3437:I:ANY] HT Support:000000003d085210 VHT Support:00000000f309d602 HE Support:00000000b644b10b
[   92.516751] wlan: [3437:I:ANY] Max supported wireless mode: 4
[   92.527138] wlan: [3437:I:ANY] Phymode: 37 
[   92.527138] 
[   92.533290] wlan: [3437:I:MBSSIE] wlan_cfg80211_start_ap: Set tx-vap ath0: vdev_id:0
[   92.538800] wlan: [3437:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[   92.546615] wlan: [3437:I:ANY] wlan_mbss_start_ht40: HT40 Arg: 0000000000000000
[   92.554040] wlan: [3437:E:MLO_MGR] mlo_ap_get_bridge_vdev_list: Invalid input
[   93.006580] 8021q: adding VLAN 0 to HW filter on device ath1
[   93.007075] br-lan: port 3(ath1) entered blocking state
[   93.011293] br-lan: port 3(ath1) entered disabled state
[   93.017263] device ath1 entered promiscuous mode
[   93.021555] br-lan: port 3(ath1) entered blocking state
[   93.026359] br-lan: port 3(ath1) entered forwarding state
[   93.031411] Set globle Ageing time set to 300 which is same for all bridge
[   93.036846] Set globle Ageing time set to 300 which is same for all bridge
[   93.044555] wlan: [3437:I:ANY] wlan_cfg80211_start_ap: Start ath1 psoc:1 vdev:0
[   93.050534] wlan: [3437:I:ANY] DES SSID SET=QWRT__5G
[   93.057679] wlan: [3437:I:ANY] wlan_cfg80211_chan_to_phymode: band:1 width: 5 channel_cfreq: 5180 center_freq1: 5250 chandef.center_freq2: 0 flags: 32
[   93.062872] wlan: [3437:I:ANY] HT Support:00000000c9d49cb9 VHT Support:00000000dcdbf03e HE Support:000000002a14217a
[   93.076272] wlan: [3437:I:ANY] Max supported wireless mode: 4
[   93.086607] wlan: [3437:I:ANY] Phymode: 42 
[   93.086607] 
[   93.092552] wlan: [3437:I:ANY] wlan_cfg80211_chan_to_phymode: band:1 width: 5 channel_cfreq: 5180 center_freq1: 5250 chandef.center_freq2: 0 flags: 32
[   93.098184] wlan: [3437:I:ANY] HT Support:00000000c9d49cb9 VHT Support:00000000dcdbf03e HE Support:000000002a14217a
[   93.111425] wlan: [3437:I:ANY] Max supported wireless mode: 4
[   93.121776] wlan: [3437:I:ANY] Phymode: 42 
[   93.121776] 
[   93.128017] wlan: [3437:I:MBSSIE] wlan_cfg80211_start_ap: Set tx-vap ath1: vdev_id:0
[   93.133350] wlan: [3437:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[   93.141221] wlan: [3437:W:MLO_MGR] wlan_mlme_start_ap_vdev: Allowing 11be non-MLO operation as per INI configuration
[   93.148855] wlan: [3437:E:MLO_MGR] mlo_ap_get_bridge_vdev_list: Invalid input
[   93.812455] SAWF Telemetry: sawf_ctx->mov_avg.packet 1000
[   93.812458] SAWF Telemetry: sawf_ctx->mov_avg.window 10
[   93.812465] SAWF Telemetry: sawf_ctx->sla_param.num_packets10000
[   93.812467] SAWF Telemetry: sawf_ctx->sla_param.time_secs10
[   93.929135] SAWF Telemetry: type 0
[   93.929142] SAWF Telemetry: detect->min_thruput_rate:0
[   93.929144] SAWF Telemetry: detect->max_thruput_rate:0
[   93.929147] SAWF Telemetry: detect->burst_size:0
[   93.929149] SAWF Telemetry: detect->service_interval:0
[   93.929151] SAWF Telemetry: detect->delay_bound:0
[   93.929153] SAWF Telemetry: detect->msdu_ttl:0
[   93.929154] SAWF Telemetry: detect->msdu_rate_loss:0
[   93.931846] SAWF Telemetry: type 1
[   93.931853] SAWF Telemetry: detect->min_thruput_rate:1
[   93.931855] SAWF Telemetry: detect->max_thruput_rate:1
[   93.931857] SAWF Telemetry: detect->burst_size:0
[   93.931859] SAWF Telemetry: detect->service_interval:0
[   93.931861] SAWF Telemetry: detect->delay_bound:0
[   93.931863] SAWF Telemetry: detect->msdu_ttl:0
[   93.931865] SAWF Telemetry: detect->msdu_rate_loss:0
[   93.934545] SAWF Telemetry: type 2
[   93.934552] SAWF Telemetry: detect->min_thruput_rate:0
[   93.934554] SAWF Telemetry: detect->max_thruput_rate:0
[   93.934556] SAWF Telemetry: detect->burst_size:0
[   93.934558] SAWF Telemetry: detect->service_interval:0
[   93.934560] SAWF Telemetry: detect->delay_bound:0
[   93.934561] SAWF Telemetry: detect->msdu_ttl:0
[   93.934563] SAWF Telemetry: detect->msdu_rate_loss:0
[   93.937800] SAWF Telemetry: type 3
[   93.937806] SAWF Telemetry: detect->min_thruput_rate:0
[   93.937808] SAWF Telemetry: detect->max_thruput_rate:0
[   93.937810] SAWF Telemetry: detect->burst_size:1
[   93.937812] SAWF Telemetry: detect->service_interval:1
[   93.937814] SAWF Telemetry: detect->delay_bound:0
[   93.937816] SAWF Telemetry: detect->msdu_ttl:1
[   93.937818] SAWF Telemetry: detect->msdu_rate_loss:1
[   95.953155] wlan: [0:I:ANY] ieee80211_acs_post_event: [EXT] Channel number: 00000000bfb28d7a
[   95.953186] wlan: [0:I:ANY] wlan_mbss_done_ht40: Channel: 00000000bfb28d7a
[   95.960688] wlan: [0:W:MLO_MGR] osif_acs_start_bss: Allowing 11be non-MLO operation as per INI configuration
[   95.967647] wlan: [1168:I:ANY] ieee80211_ht40intol_evhandler: [EXT] Lock held duration (14ms)
[   96.024392] wlan: [0:D:dfs] Skip CAC on NON-DFS chan
[   96.024657] wlan: [0:I:CMN_MLME] mlme_ext_vap_up: VAP (ath0) 00:03:7f:12:43:43 is up
[  155.180689] wlan: [0:I:CMN_MLME] mlme_ext_vap_up: VAP (ath1) 00:03:7f:12:ab:ab is up
[  231.186832] nss-dp 3a504000.dp1 eth0: PHY Link up speed: 100
[  231.217856] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready